M.D.M Automotive Machine Shop LTD. - Calgary

Name: M.D.M Automotive Machine Shop LTD. - Calgary
Address: 410 35 Ave NE, Calgary, AB T2E 2K7, Canada, E, 2, Canada

3.9/5 ★ based on 8 reviews

Contact M.D.M Automotive Machine Shop LTD.

Address :	410 35 Ave NE, Calgary, AB T2E 2K7, Canada
Phone :	📞 +
Postal code :	2
Categories :	Machine shop ,
City :	E

410 35 Ave NE, Calgary, AB T2E 2K7, Canada

Best Machine shop in Canada

j	jimmy howard on Google ★ ★ ★ ★ ★ We are a licensed Auto Repair Shop in Calgary in NE Calgary. A-M Automotive Engine - Cyl Head Rebuilding Ltd rebuilt my 350 Chev motor. The motor runs great! Prior to this, we have had other motors rebuilt, heads, and flywheels etc., done at MDM Automotive Machine Shop Ltd for the past fifteen years with no issues or concerns and have found them knowledgeable and friendly.
T	Tools In Motion on Google ★ ★ ★ ★ ★ Our auto repair business has been using Frank at MDM for about 5 years now. We have him resurface flywheels; machine exhaust manifolds; rebuild cylinder heads and even rebuild engines. It has all been good work. Frank did all the machining on the engine in my personal truck that I drive every day, and 5 years later it still runs great.
M	Martin Fiesel on Google ★ ★ ★ ★ ★ Had Frank help me with a 1965 Ford 289 engine. The workmanship was top notch along with the advice on the build. Starting another one shortly and wouldn't go anywhere else. Highly recommended by many auto parts dealers in the city as well. Noticed some negative reviews but there are many factors that go into an engine build and folks are always looking to blame when things go wrong. I would be very very surprised if it had anything to do with Frank's work.
J	Jake Tucker on Google ★ ★ ★ ★ ★ I have been dealing with Frank for a number of years and I'm sad to say the attention to detail is not there anymore. Got a phone call that my block was toast because a main bearing had spun in the block. Being this was a running engine that made no sense to me. I went and looked at my "block" it wasn't even my engine. When I got the bill for work done on my block he charged me for inspecting somebody else's engine. I took a picture of the quote and we did not have a line hone quoted. When I asked Frank to bring up the quote he added line hone with a pencil to the bottom. Said I had called in and asked him to do it. If you can't even remember who's engine belongs to who and the work being done. How can you think the customer is even being charged correctly. Hope you enjoy that $250 dollars you lost a customer for life and I have been sure to tell all my friends and recommend against this shop. Good luck guys.
M	Martin Buschau on Google ★ ★ ★ ★ ★ MDM Automotive did great work for me on the front spindles for my car. They removed the old hubs, bearings and ball joints and replaced with new ones. One of the bearings was especially stuck in place but they had the press equipment and skill to successfully remove it. They even cleaned up the speed sensor mounting holes and other areas of the spindles that will help speed up installation. Overall a quality job done in a very timely manner from some knowledgeable and friendly people!
P	Pierce Fallon on Google ★ ★ ★ ★ ★ Had known frank from 2010 when I bought a 5.7 long block for a 1998 Silverado. That engine worked a treat and a reasonable cost. So lately a friend and I bought a honda ridgeline to potentially flip if and make a few bucks. We bought it with the engine half stripped and knowing engine trouble was ahead. Figured if be able to hone, re ring and do heads. But I found the bores were worn far beyond honing. We searched for a engine (J35A9) but only ever recieved junk as I bore scoped them and they were all scored. So I brought the block to frank and he said he would be able to salvage it. I stripped the block and heads and left them to him. He also gave a quote for all parts to rebuild. We went for it. It was supplied in a timely fashion with all the parts and info I needed to rebuild. Quality work on cylinders amd heads (full time heavy equip tech so know what I'm looking at). Rebuilt the engine and 1000km later and it's running perfectly. Thanks to frank and team!
g	garyrobertson3a on Google ★ ★ ★ ★ ★ The through axle on my Fatbike became fused. I went to three bike shops to have it removed and no one could do it. The only way a bike shop could remove the wheel could be to take an angle grinder to the fork. I would have had to buy a new fork and hub which would have been very expensive and inconvenient. I took the bike to Frank at MDM. It took a lot of work but Frank was able to drill out the axle and save the fork. He even did it without ruining the bearings. Thanks for your hard work Frank. I really appreciate it.
L	Lex Sarrasin on Google ★ ★ ★ ★ ★ Called and got "This person's mail box is disable" Very shortly after I got a call back from Frank, he was very nice on the phone. I had an Inline 5 exhaust manifold that might need to be resurfaced. I would only know when I took it off during a quick turn around before the vehicle when back out on a long trip. We talked on the phone and he quoted me a good price. He also was willing to go out of his way to help me out with my tight time restrictions. Very good experience so far.